BANG4BUCK Professional HVLP Gravity Feed Air Spray Gun, 1.4mm 1.7mm 2.5mm Nozzles, 1000cc Aluminum Cup with Gauge for…

Bang4Buck hvlp gravity spray gun set -auto Paint Primer-steel Flake with air regulator. years guaranty.

Features :
-Stainless-steel needle and nozzle accommodate quite a lot of coatings.
-Exact 1.4mm/1.7mm/2.5mm Stainless-steel needle and nozzle set.
-3 Knobs for Complete adjustment: Fluid, Development and Air Drive Controls.
-1000cc Aluminum Fluid Cup with Lid.
-Perfect for Complete Atomization while Spraying Base-coats, Transparent-coats, Single Degree and different Gentle to Medium Viscosity Fabrics.

Specifications:
Gravity type
Air Inlet: 1/four” + Barbed and Nitto Plug
Able to attach hose or nitto socket
Nozzle Dimension: 1.4mm, 1.7mm, 2.5mm
Running Drive: 30-forty five psi
Air intake: 7-12 CFM
Compressor required: 2-3 HP
Gun dimensions (with out cup): 15 x 18.5cm
1000mm Aluminum cup

Full Adjustment:
The required Development and fine atomization can also be simply obtained through regulating the Development Adjusting Knob and Fluid Adjusting Knob.

–Pattern Adjustment: Flip the Development Adjusting Knob to the fitting till tight in order to make spray Development spherical, or Flip left to make spray Development ellipse.
–Fluid Adjustment:Flip the Fluid Adjusting Knob clockwise in order to lower the quantity of fluid output and counter-clockwise will building up fluid output.

What’s within the Bundle?
1 x Spray Gun
1 x 1.4mm Nozzle
1 x 1.7mm Nozzle
1 x 2.5mm Nozzle
1x Real Micrometer Air Regulator with Gauge
1 x 1000cc Cup
1 x Barbed Tail
1 x Adjustment Wrench

Make certain this suits through coming into your style number.
Bundle Come with: 1 x Spray Gun; 1 x 1.4mm Nozzle; 1 x 1.7mm Nozzle; 1 x 2.5mm Nozzle; 1 x 1000cc Aluminum Cup(1L); 1x Real Micrometer Air Regulator with Gauge; 1 x Barbed Tail; 1 x Adjustment Wrench
This spray gun set is designed to offer equivalent atomization and partical Dimension for a wide variety of floor painting.
It has regulate knobs for Complete adjustment over spray Development, fluid regulate and air Drive. Incorporates 1.4mm/1.7mm/2.5mm Stainless-steel needles and nozzles set to fulfill your different packages
Gentle weight, ergonomic design and simple trigger pivot reduces Running fatigue.
Perfect for spraying base coats, Transparent coats and different top viscosity coatings such as excessive top build or polyester primers, thick enamels, latex paints, chip defend, steel flakes, gel coats, liquid masks, and the like. years guaranty.