3M Speedglas Welding Helmet 9100, 06-0100-30iSW, with Auto-Darkening Filter 9100XXi 3 Arc Sensors for MMAW TIG MIG Tack…

Product Description

The 3M Speedglas Welding Helmet 9100 with Auto Darkening Filter (ADF) 9100XXi can be utilized for MMAW, TIG, MIG, Tack, Plasma and arc welding processes. This welding helmet with 9100XXi auto darkening filter (ADF) Means that you can more readily recognize colors with greater peripheral vision in comparison to our other models. Improved vision would possibly can help you center of attention on welding setup, welding technique, precision grinding and inspection of just-completed welds. The 9100XXi featuring 3M Speedglas Natural Color Technology helps assists in enhanced weld puddle regulate with a view that appears lighter, brighter and more realistic. Three arc detection sensors within the lens turn on the auto darkening filter quickly after striking an arc. Selectable dark shades 5, 8, 9 through 13 with a light shade of 3 and a viewing area of 72 mm X 107 mm. The 3M Speedglas Silver Front Panel 9100XXi houses external controls, enabling fast and easy get entry to to the grinding and memory modes without disposing of safety gloves. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for place of job use. Unless specifically stated differently at the applicable product packaging or literature, these products aren’t intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, number one or secondary school, recreational/sporting, or other uses not described within the applicable product packaging or literature), and should be selected and utilized in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), in addition to all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products would possibly lead to injury, sickness, or death. For lend a hand with product selection and use, consult your on-web site safety professional, industrial hygienist, or other subject matter expert.

From the Manufacturer

The 3M Speedglas Welding Helmet 9100 with Auto Darkening Filter 9100XXi helps provide professional-grade eye and face protection from debris and harmful radiation at the same time as offering better visibility. With improved optics, the 3M Speedglas Auto Darkening Filter 9100XXi Means that you can more readily recognize colors as in comparison to our other models. Welders will see a view that may be less green. Colors, shades, tone in addition to light and dark contrasts will all stand out with more vivid detail. Many welders will find they have got better regulate of the weld puddle with a view that appears lighter, brighter and more realistic. This will can help you center of attention in your welding set-up, welding technique, precision grinding, and inspection of completed welds.

Switch Between Welding and Grinding in just 2 to 3 Seconds — all with Your Gloves On

This helmet also comes with the 3M Speedglas Silver Front Panel 9100XXi, which offers the convenience of switching between welding mode and shade 3 grinding mode with a simple “gloves-on” touch of an external button at the silver front panel. There’s no wish to dispose of the helmet to switch these settings. Memory modes allow gaining access to considered one of two pre-set welding modes. Both memory modes have a person setting for dark shade, light to dark switching sensitivity and dark-to-light delay. An instant “Seize and Go” feature robotically turns the welding filter on in your most latest welding setting on every occasion you pick up the helmet. To save lots of on power, it robotically shuts down after a period of inactiveness.

Auto Darkening Filter Reacts Quickly After Striking an Arc The Speedglas lens features user-selectable dark shades of shades 5, 8, 9 through 13, and a light shade of 3. With a viewing area of 2.8 inches high x 4.2 inches wide (72 mm x 107 mm), the 9100XXi provides the largest viewing area to be had within the 9100 Series helmets, and an expansive field of view that helps the welder to peer the work in progress with minimal obstruction. Three arc detection sensors within the lens turn on the auto-darkening filter when an arc is struck. The lens then switches from light to dark shade in approximately 0.1 milliseconds (1/10,000 of a second), giving the welder an instant transition from light to dark shade at the same time as maintaining an optimal view for torch placement and weld puddle regulate. When the weld is complete, the filter robotically returns to light shade 3 with a delay of approximately 40-250 milliseconds, allowing almost immediate inspection of the weld pool and preparation for the following weld. Exhaust vents readily direct your exhaled air out of the helmet, helping to cut back heat, humidity and fogging of the welding filter.

The auto darkening filter can lend a hand reduce the wish to flip the welding helmet up and down between torch placements, which enhances productivity by reducing the stop-and-start time needed with passive lens welding helmets. This option too can reduce neck stain from “helmet nodding,” at the same time as greatly increasing the accuracy of torch placement. The helmet’s battery life is approximately 2,000 hours. The 2 Cr2030 3V lithium batteries that power the Auto-Darkening filter are easily accessible and replaceable, extending the helmet life.

Without equal in comfort with a headband that shapes for a customized fit

3M Speedglas Welding Helmet 9100 with Auto Darkening Filter 9100XXi feature a highly adjustable, ergonomically designed head suspension system featuring:

• • Two adjustable crown straps for increased stability and weight distribution
• • Padded front headband designed to frivolously distribute pressure
• • Swivel-mounted smooth ratchet system for easy, precise tightening and ergonomic fit
• • Snap adjustment of nine different helmet angles
• • Large knobs for easy adjustment of “prep” and “parking” pivot positions, even at the same time as wearing gloves
• • Fits head sizes 6.25 to 8 (50 to 64 cm) approx.

Be certain this fits by entering your model number.
IMPROVED OPTICS — 9100XXi Auto Darkening Filter enables more realistic colors to be visible for welders. See your welds and welding pool with more precision, contrast and natural-taking a look colors
FAST AND EASY ACCESS — External welding helmet controls enable grinding and memory modes the usage of 9100XXi silver front panel without disposing of your gloves
TWO MEMORY MODES — Allows a welder to set individual auto darkening filter settings for darkness shade, light-to-dark switching sensitivity and dark-to-light delay with the frenzy button get entry to
AUTO-ON TECHNOLOGY — Means that you can Seize their welding helmet and get to work quickly by turning to the last setting used
EXPANDED PERIPHERAL VISION — Side windows enable a big sight view making potential hazards such as obstacles and coworkers more visible
ANSI Z87.1-2010 — Meets affect standard
ANSI Z89.1 — Meets standard when used with an approved hard hat
ALSO INCLUDES — Welding cap, carry bag and starter kit
For Industrial/Occupational Use Only — Not for consumer sale or use
Improved optics allow welders to peer more realistic colors
The 9100XXi silver front panel houses external controls, enabling fast and easy get entry to to the grinding and memory modes
Two memory modes that allow welders to set individual settings for dark shade, light-to-dark switching sensitivity, and dark-to-light delay
Seize and go with auto-on allows welders to work quickly
External grinding mode activation
An improved user interface that may be easy to be aware
Meets ANSI Z87.1-2010 affect standard
Welding cap, carry bag, and starter kit included