Antra True Color Wide Shade Range 4/5-13 Jumbo Screen 3.86X3.5″ Auto Darkening Welding Helmet AH7-860-001X with Solar Power TIG MIG/MAG MMA Plasma Grinding 6+1 Extra lens covers

Bigger is at all times better

More covering area, better viewing angle, more flexible

• Luxury viewing size of 13.5 SQI provides comfort working zone, which is twice larger when in comparison to entry level lens
• Easier to look awkward spots than smaller viewing size helmets, more flexible for use in numerous scenarios.

Clearer Lens with Blue Lighting Suppression

Clearer welding puddles and pools, more sensitive and 4 premium sensors

• Blue light reduction lens (Optical Class 1/1/1/2) provides clear viewing and blue light protection, and is helping to put solid beads.
• 4 Redundant sensors ensures high reliability and sturdiness.
• Quicker response time and more flexible when utilized in applications with in part blocked view.

One helmet , a couple of processes

Versatility is some other great asset of AH7-860 along with its reliable performance

This unit is operating on such a lot of ARC related applications including but no longer limited to:

• Gas Tungsten Arc Welding (GTAW), sometimes called Tungsten Inert Gas (TIG) welding, DC or AC
• Gas Metal Arc Welding (GMAW), once in a while referred to by its sub-types Metal Inert Gas (MIG) Welding or Metal Active Gas (MAG) welding
• Flux-cored Arc Welding (FCAW or FCA)
• Shielded Metal Arc Welding (SMAW), sometimes called Manual Metal Arc welding (MMA or MMAW), flux shielded arc welding (stick welding)
• Plasma Cutting (PAC)
• Plasma Arc Welding (PAW)
• Grinding

(Note: Different settings is also required for every application.)

Antra’s Interference Suppression Technologies enables AH7-860 to:

• Detects and response consistently on DC welding arc as little as 2 Amps
• Minimize false triggering in industrial Metal-halide Lighting, on higher sensitivity setting if no longer facing Lighting directly
• Minimize false triggering in sun Lighting, on higher sensitivity if no longer facing sun directly

Simple to regulate settings

Most of the time of thumb, get started with a shade that may be too dark to look the weld zone. Then, go to a lighter shade which provides a sufficient view of the weld zone without going below the minimum.

• Grinding Mode: Set the switch to Grind, the lens will stay on shade 4, may not be activated by any arc.

WARNING: Switch “Weld” mode to keep away from accidental flashes.

• Shade Adjustment: First set the SHADE RANGE the use of the variety selector switch, “5-9” or “9-13”, then use the Shade dial to set the specified shade numbers.

5-8 is excellent for a few low amp application and small current plasma cutting jobs.

• Delay Keep watch over: Dark to Clear Delay, to keep away from glow flashes from the new bead. Turn clockwise, the delay time can be increased.
• Sensitivity Keep watch over: Controls how sensitive the sensors are responding to welding arc. Right kind setting can keep away from false triggering from adjacent arc whilst ensures auto darkening when needed. Turn clockwise, the sensitivity can be increased. Set the sensitivity absolute best, and reduce if there false triggering exists.
• All internal settings is excellent for those that wish to work in limited spaces